So, I don't know if you've been there, but I have had the worst crafter's block these last couple weeks. You know... no motivation, no ideas, procrastination... the usual.
I decided to try to get myself back into the swing of things.
If you ever find yourself in that boat, either take a break from it or try to make something just for fun, no special occasion required. :)
Just do something you enjoy, to remind you that it's fun to be creative!
Here is the new friend I made to help break me out of my rut:
|Not sure who will own this little deer, but she was fun to make. :)|
After getting a little crafting energy back, I started looking around the house to see if anything needed fixing or updating. I found two lamps with incredibly sad, dingy and tired lampshades.
I scanned Pinterest for ideas, and found this great post from Mari Makes.
Check out the link below for this great tutorial!
I decided to warm up by trying out this tutorial for one of my seen-better-days-lampshades. Instead of a vintage dictionary, I used my Spanish-English dictionary... who doesn't like educational redecorating??
If you need to look up a word in Spanish that starts with the letters A-G, just come check out my lamp. :)
Next, I wanted to make-over another lampshade by changing out its tired trim for a new trim I made from fabric.
-Plain lampshade, any size would work!
-Fun fabric to make trim
Ok, this is pretty simple, and you probably don't even need a tutorial. :) But here we go anyways!
1-- Strip your lampshade of any previous trim. I was able to just sort of tear it off without damaging the shade fabric underneath.
2-- Select your fabric! For the trim, I actually used a fabric napkin I bought at Target a few years ago. You never know where you'll find a great print! I've used pretty fabric napkins from World Market and Target several times for throw pillows, artwork.... and now, a lampshade. :)
You could certainly use any fabric you like, but the fabric napkin has the added benefit of having finished edges which I used on the lamp too. Reduce, reuse, recycle, right? Nothing is wasted!
3-- Determine the width of the trim you want for your lampshade. For the bottom trim of this shade, I cut strips that were 2" wide and used the lines on the print to make sure each strip showed the same view of that print.
4-- Use the iron to fold in the raw edges. I folded 1/2" in on each side to leave 1" wide trim with no raw edges showing.
5-- For the vertical seams and the top of this lampshade, I wanted a smaller trim. You could just cut a smaller width of fabric (maybe 1 or 1.5") and repeat the same process as for the 1" wide trim. Since the fabric napkins had finished edges that were ~1/2", I just cut out the the finished edges, trimming them so no raw edges from the fabric would be visible. No ironing necessary for these because the manufacturer already did the work for me!
6-- Now it's time to start applying the trim. I think you could do this in any order, but I started with the vertical seam trim, then the bottom and top.
|Use hot glue sparingly to apply the trim. Some thinner fabrics or ribbon could show the lumps and bumps from hot glue, but this fabric concealed it well.|
Time for the bottom of the shade...
|Whenever you finish one section of trim, just fold over the end, to hide the raw edge, and glue it.|
|The corners of this shade were a little tricky; I tried to make it work, lining up the trim with the bottom of the shade and cinching the fabric on the tapered corners.|
Last step: use the last of the ready-made trim from the napkin for the top of the shade.
I think this would work well with any shape/size lampshade. Just follow the curves and lines of the shade, and have fun!